Support page for
of SXM 6.3L cases
Assembling a computer requires certain knowledge and skills! This brief instruction shows the assembly sequence and is designed for the user who has already assembled computers .
Also, the case in these photos may be a little different from what you have, it happens, I make some changes in almost every batch.
-
Preparation.
Make sure your assembly components match the chassis specifications.Remove the covers and the front panel by unscrewing the screws.
-
Installation of the Power Supply Unit (PSU)
The case supports the installation of SFX or SFX-L PSU format. Install the PSU in the case and fasten with screws.
-
Installation of the casing fan.
Skip this step if you do not plan to install a fan.
The case supports the installation of slim fans 120mm to 17mm thick, for example, Noctua NF-A12x15.
We recommend installing the fan with the direction of air flow upwards. Fasten the fan with two screws
-
Installing a video card.
Skip this step if you don't plan to use a graphics card.
Mini-ITX video cards with a thickness of no more than 44 mm and a length of up to 183 mm can be installed in this case.
Unscrew the outer corner of the fastener from the case, as well as the bar inside the case on which the riser cable is fixed. Attach riser cable to the video card. Install the video card in the case by winding the riser cable on the side of the motherboard and screw it with screws, and also screw the outer corner to the plug of the video card
-
Installation of 2.5" storage devices
Skip this step if you do not plan to use 2.5" drives.
Connect the interface to the drive. Screw the drive to the chassis from the front of the chassis.
Also, if you have an SFX power supply unit, you can install another 2.5" format drive on the bottom of the case. If you have an SFX-L power supply unit, you will not be able to install the drive at the bottom.
-
Installing the motherboard (MB)
The case supports MB mini-ITX format.
Read the instructions for the motherboard. Install everything you need on it (Processor, CPU cooler, RAM, NVMe drive, if used. Follow the instructions of the component manufacturer). Install the plug in the case if it is not fixed on the motherboard before mounting the MB.
Very carefully put the MB into the case, placing it on the racks. Screw the MB to the case using the screws from and a magnetic screwdriver. Connect the PCIe riser cable to the MB if you plan to install a video card, as well as the power button connector.
-
The final collection.
Carefully route all cables using nylon cable ties. Check that all cables are connected. Install the covers on the case and fasten with screws.
