top of page
лого мал полное.png
31.jpg

SL1 2.1L

SL1 2.1L rev.3 is our smallest case!  It was designed for office and multimedia applications.

​

The simple design of the case makes it convenient to assemble a PC in it and maintain it. The case can be hung behind the monitor or on the wall using the VESA mount.

 

  • The case is made of durable carbon steel 1mm thick
     

  • For builds without a graphics card, use a CPU with integrated graphics
     

  • Size: 190 x 190 x 60mm
     

  • We paint with powder paint in different colors
     

  • In the new revision, the side covers are removable
     

  • Installed special nuts with a thread of more than 3mm
     

  • The power button is now on the sidebar on the front
     

  • Modification with a USB connector near the power button is possible

​

sl1_png.png
29.jpg

  • ​Case supports installation of mini-ITX motherboards (170x170mm)
     

  • Use low-profile CPU coolers that are no more than 43mm high.
     

  • One 2.5" drive can be installed
    *The thickness of the drive reduces the allowable height of the CPU cooler.
     

  • Permissible height of RAM slats no more than 48mm
     

  • To power your computer, connect the pico-PSU with an external power supply.

 

Recommended for assembly, in a case

SL1 2.1L​ following configuration.

​

  • CPU:      RYZEN 5 max TDP 65W
     

  • Cooler: Scythe Kodati BSCKDT-1100
                   JONSBO HP-400
                   NOCTUA NH-L9a
     

  • pico:      HDPLEX 200W

  • PSU:      180-240W 19.5V

​

bottom of page