top of page


    SLM1 4L - case for mini PC with external power supply. It was designed for mid-range components. Core i7 processors and GeForce GTX1660 video cards. Extremely easy PC assembly due to simple design. It takes up little space in the backpack and on the desktop.



Без имени-1.png
  • Super SLIM made of aluminum weighing less than 1 kg

  • Unique SKYSLOTS ventilation holes developed by NFC systems

  • Compatible with mini graphics cards

  • Size: 325 x 192 x 65mm

  • We paint with powder paint in different colors

  • The video card is connected via a PCI-e riser cable

  • Compatible with pico PSU HDPlex

  • Removable stand for vertical installation

  • ​Case supports installation of  mini-ITX motherboards (170x170mm)

  • Compatible with mini graphics cards up to 178mm long, no wider than 130mm, dual slots (up to 40mm)

  • Use low-profile CPU coolers with a height of no more than 42mm.

  • Permissible height of RAM slats no more than 47mm

  • For power, install a pico PSU and an external power supply

  • You can install several 2.5" drives under the video car


Recommended for assembly in the case SLM1 4L following configuration.

  • CPU:     Core i5 / RYZEN 5 max TDP 65W

  • Cooler: Scythe Kodati BSCKDT-1100
                   JONSBO HP-400
                   NOCTUA NH-L9i / NH-L9a
                   Thermolab (cooltek) ITX30

  • GPU:     mini-ITX Geforce GTX1660

  • PSU:     HDPLEX 200W
                  - psu 19.5V 180-240W

SLM1 lm 4L

Left side perforated for better CPU cooling

SLM1 lm 4L

Powder paint Dark Gray metallic "Sahara"

SLM1 lm 4L

Air vents SKYSLOTS by NFC

SLM1 lm 4L
SLM1 lm 4L
SLM1 lm 4L

CPU cooler up to 42mm high

SLM1 lm 4L

Flex cable riser LiHeat 350mm Type.B

SLM1 lm 4L

You can install two 2.5" drives in the case

SLM1 lm 4L

In the case, you can install two 2.5" drives under the video card.

SLM1 lm 4L

Dual-slot graphics cards up to 180mm long

SLM1 lm 4L

The CPU faces up and the GPU faces up

SLM1 lm 4L

Compatible with pico PSU HDPlex 200W

SLM1 lm 4L prototype
SLM1 lm 4L

Hole for 7.4x5.0mm new type connector

bottom of page