Support page for of
SL3 3.8L cases
Assembling a computer requires certain knowledge and skills! This brief instruction shows the assembly sequence and is designed for the user who has already assembled computers .
Also, the case in these photos may be a little different from what you have, it happens, I make some changes in almost every batch.
-
Make sure your assembly components match the chassis specifications.
Disassemble the case by unscrewing the screws.
-
The housing supports installation of flex 1U or HDplex 250 GaN and HDplex 500 GaN modules.
-
If your PSU has a modular cable connection, we recommend that you connect the necessary ones before installation in the case. Install the PSU flex 1U in the case and fasten with screws.
-
Before installing the PSU HDplex 250 GaN or HDplex 500 GaN, screw the plug to the case, and the C14 connector to it.
-
We install the mini-ITX motherboard with the components installed on it.
Read the instruction manual for the motherboard. Install everything you need on it (Processor, CPU cooler, RAM, NVMe drive, if used. Follow the instructions of the component manufacturer).
-
You can install two drives in the basket or one without it.
Everything is simple with the installation, screws are attached, cables are connected, everything is ready.
-
Install the LowProfile video card into the motherboard and fasten it to the case with screws.
-
Route all cables using nylon cable ties. Check that all cables are connected. Install the cover on the case and fasten with screws.
